How To: Sliding Screen Doors #2

Home Product Categories Product Availability Catalogs *How-to* FAQ's Safety Links Window Screening Requires Adobe Reader	Sliding Screen Door Rollers - Page 2
	Step 4. Look into the frame of the door and identify the roller style that you need from the chart below. Follow the specific instructions to remove that style of roller. Example: As with this roller type, you can see that a slotted screwdriver is needed to lift the spring off the adjustment screw (Figure 4A). Now you can pull out and replace the roller (Figure 4B).
	If this is your roller: Then do the following:
		Locate and remove the roller mounting screw at the bottom of the door. The screw should be above the adjustment screw hole. Now pull out the roller from the door frame, using pliers if needed. This style of roller has dimples in the housing to lock the inner housing up inside the outer housing, to help with installation. Screw the new roller in and snap the inner frame into the outer frame. Re-hang your door. Once you start turning the adjustment screw (clockwise), the inner frame will snap back out.
		The mounting screw for this roller is located at the end of the spring. Remove the screw with a Phillips screwdriver. Unless you needed to back off the adjustment screws to remove the door from it's frame you shouldn't need to adjust the height of the new rollers.
	Roller Identification Continued on Page 3
	Page 1 Page 2 Page 3, 4
	Home Product Categories Product Availability Catalogs How-To FAQ's